Bridge Pier Shuttering
Application – Bridge piers, pier caps and abutments
Shuttering Plate – 12 SWG (2.64 mm) and above MS sheet
Frame – Slotted angle frame 35 / 40 / 45 / 50 x 5 mm
Shapes – Round, oblong and rectangular, as per drawing
Supports – Channel soldiers, tie rods, clamps and scaffolding / props as per design
Finish – Primed and painted; hot-dip galvanised on request
Sizes – As per drawing
Overview
JBFS bridge pier shuttering is steel formwork for bridge piers, pier caps and abutments, made to your project drawing. Shapes can be round, oblong or rectangular. Panels use 12 SWG (2.64 mm) and above MS sheet on a slotted angle frame and are built in sections for quick handling and stripping. They are held by channel soldiers, tie rods, clamps and scaffolding or props as per design, and can be re-used many times.
Specifications
Application – Bridge piers, pier caps and abutments
Shuttering Plate – 12 SWG (2.64 mm) and above MS sheet
Frame – Slotted angle frame 35 / 40 / 45 / 50 x 5 mm
Shapes – Round, oblong and rectangular, as per drawing
Supports – Channel soldiers, tie rods, clamps and scaffolding / props as per design
Finish – Primed and painted; hot-dip galvanised on request
Sizes – As per drawing
