Crash Barrier Formwork
Application – Casting concrete crash barriers / parapets on bridges, flyovers and viaducts
Shuttering Plate – 12 SWG (2.64 mm) and above MS sheet
Frame – Slotted angle frame 35 / 40 / 45 / 50 x 5 mm
Profile – As per project crash barrier drawing (MoRTH / IRC)
Section Length – As per requirement, for continuous casting
Fixing – Base clamps, tie rods and adjustable supports
Finish – Primed and painted; hot-dip galvanised on request
Re-use – High
Overview
JBFS crash barrier formwork is steel shuttering for casting concrete crash barriers and parapets on bridges, flyovers and viaducts. Panels are fabricated to the barrier profile in your drawing from 12 SWG (2.64 mm) and above MS sheet on a slotted angle frame. Section length is made as required for continuous casting. The result is an accurate, repeatable profile and a clean finish across long runs. Panels are quick to fix, align and strip.
Specifications
Application – Casting concrete crash barriers / parapets on bridges, flyovers and viaducts
Shuttering Plate – 12 SWG (2.64 mm) and above MS sheet
Frame – Slotted angle frame 35 / 40 / 45 / 50 x 5 mm
Profile – As per project crash barrier drawing (MoRTH / IRC)
Section Length – As per requirement, for continuous casting
Fixing – Base clamps, tie rods and adjustable supports
Finish – Primed and painted; hot-dip galvanised on request
Re-use – High
